F. and S. Marriott 140 Newbegin, Hornsea, England, HU18 1PB

May 2010. Stephanie died peacefully on 19th April after a short stay in hospital. She had been suffering from acute cervical cancer. Fred will continue to run the business to the best of his ability. The web site is slowly getting under control again as he tries to take over some of Stephanie's responsibilities, and learns some of the mysteries of Dreamweaver.

Cine Editing Equipment for sale

Please note that prices do not include delivery. Please e-mail for more information. For postage/shipping charges we need to know destination country and whether airmail or surface mail is required.

All electrical goods have UK specification unless otherwise stated and may not be usable in other countries due to differences in mains supply.

Film Editors - Dual Gauge

Film Editors - Super-8

Film Editors - Standard-8

Film Editors - 16 mm

Film Splicers

Bottom of Page

Also available: Sound Effect and Music Recordings for use with making films. Cine Accessories

Film Editors - Dual Gauge

Note: unless otherwise stated, all editors are made for UK mains power supply i.e. 240 v.

Consulmatic Tri-Gauge Editor, maximum spool size 400 feet, standard 10 watt 6 volt lamp, wind on direct, rewind geared up, screen size 100 mm. x 70 mm., very bright on both gauges, very easy gauge change, good frame marker, easy threading, accessory shoe, a very nice editor, made by Goko, instructions. (25447) £50.

Erno E-500 Dual 8 Editor, maximum spool size 400 feet, 10 watt 6 volt lamp, wind-on direct, rewind geared up, excelent frame marker, copy instructions, screen size 70 mm. x 100 mm., quite bright, gauge change fairly easy, continental 2-pin mains plug, most of the original box. (25668) £45.

Goko Film Cleaner Replacement Felts, genuine original replacement parts, set of two. (20930) £1.50.

Prinz Oxford 800 Dual 8 Film Editor, takes 600 foot maximum spool, 10 watt 6 volt standard lamp, forward wind geared down, reverse wind geared up, fairly easy gauge change as the sprocket must be turned over, large bright screen 120 mm. x 90 mm, good film marker, light switch, near mint condition. (25085) £55.

Prinz Oxford 800 Dual 8 Editor, 400 foot maximum spool size, 10 watt 6 volt standard lamp, wind geared down, rewind geared up, screen size 120 mm. x 90 mm. quite bright, good film marker, made by Goko, mint condition in original box with copy instructions. (25267) £65.

Return to Top

Film Editors - Super-8

Note: unless otherwise stated, all editors are made for UK mains power supply i.e. 240 v.

Goko Sound Editor RM3B, takes 600 foot maximum spool size, 10 watt 6 volt standard lamp, screen size 100 mm. x 75 mm., plays back at 18 and 24 f.p.s., variable speed over-ride, powered film advance. viewing is better in subdued light, short mains lead, soft cover, copy of instructions, excellent condition. (25039) £125.

Minette Viewer Editor Super/Single Eight, for 115 volt supply, 400 ft. max. spool, small bright screen gives sharp picture, proper gate and punch which marks edge of film at actual frame in view, 10w 6v normal lamp, wind geared down, rewind geared up, regarded by many as the best. (21473) £29.50.

Minette Viewer Editor Model S4, regarded by many users as the best editor. Proper projector-type gate holds the film in focus all the time, proper punch marks the frame in view, screen size 95 mm. x 70 mm., quite bright, wind on geared down, rewind direct, framing knob, no light switch. Uses 10 watt 6 volt standard lamp. Near mint condition in most of original box and packing. (25724) £75.

Prinz Oxford 600 Super 8 Movie Editor, 400 foot maximum spool size, 120 mm. x 90 mm. screen size, quite bright, sharp contrasty picture, 10 watt 6 volt standard lamp, wind geared down, rewind geared up, made by Goko, near mint condition with copy instructions. (25265) £50.

Travenar Super 8 Viewer Editor, mint condition in original box, not very good but you can see what you've got on film, original instructions, continental 2 pin plug. (25560) £12.

Return to Top

Film Editors - Standard-8

Note: unless otherwise stated, all editors are made for UK mains power supply i.e. 240 v.

Erno Director 8 mm. Movie Editor, 400 foot maximum spools, 10 watt 6 volt standard lamp, wind on direct, rewind geared up, large screen not very bright, use subdued room lighting, projector style gate, good frame marker, light switch, focus and frame controls, excellent condition with most of original box and packing. (25749) £15.

Minette Viewer Editor Eight, 400 foot maximum spool size, 10 watt 6 volt standard lamp, wind on geared down, rewind geared up, usual Minette gate and frame punch, an early model, not quite as good as the later version, but still good. Needs subdued room lighting. Excellent condition with instructions. (25445) £25.

 

Film Editors - 16 mm.

Note: unless otherwise stated, all editors are made for UK mains power supply i.e. 240 v.

Nothing at present.

Return to Top

click here for condition categories click for how to order click for how to contact us

Film Splicers

If you are unsure about whether to choose a cement splicer or a tape splicer, you may find Pieces November 2002 helpful.

Agfa F8S Super 8 Tape Splicer, mint condition in original box with copy instructions. (25480) £14.

Agfa F8S Automatic Super 8 Tape Splicer, original Agfa tapes are hard to find now, but it works well with QuikSplice tapes. Near mint condition with instructions. (25170) £20.

Cineman L Cement Splicer for Standard 8 and 16 mm., good quality conventional splicer similar to typical Japanese design, but made from diecastings. Looks unused. Original instructions and box. (24712) £4.

Dixons Tape Splicer for Super 8, in original packet with instructions, uses Quik Splice tapes. (25535) £11.

Fujica Single 8 Tape Splicer, in our opinion this is the best Super 8 tape splicer. Uses a pre-perforated roll of splices, still available. A part-used roll is included. Near mint condition, worn original box, copy instructions. (25535) £25.

Kodak Presstapes 16 mm. in sealed packet of five tapes. (24599) 50p. We have a quantity of these.

LPL Super 8 Patch Tape Splicer, near mint condition with instructions in original box. (25453) £10.

Marguet Bi-Film Cement Splicer for Standard 8 and 16 mm., one of the best traditional splicers, French manufacture, excellent condition with copy instructions in dilapidated original box. (25490) £10.

Marguet Tri-Film Cement Splicer for Standard-8, 9.5 mm., and 16 mm., near mint condition, one of the few good splicers for 9.5 mm. film. (25522) £18.

Marguet Cement Splicer Trifilm Automatic for standard 8, 9.5 mm., and 16 mm., one of the few good splicers for 9.5 mm. film, excellent condition in original box. (25672) £18.

Minette DF Bevel Cemeent Splicer for Standard 8 and 16 mm., copy instructions, near mint condition in original box and packing. (25392) £15.

Minette Tape Splicer Super 8, mint condition, easy to use but no instructions, in original box. (25572) £12.

Muray Super 8 Automatic Cement Splicer in original box with instructions in French, excellent condition. (25451) £14.

Noris Splicomatic Bevel Cement Splicer for standard 8 and 16 mm. A fine machine but this example is not working perfectly. It will produce the finest bevel cement splices but the "automatic" button has been strained. Film plates must be lifted manually. Cosmetic condition is mint, in original box and packing with copy instructions. (25372) To clear at £10.

Noris Splicomatic 8/16, a rare late version of this superb splicer for standard 8 and 16 mm. film. It appears to have been introduced in 1965 after Super 8 came out. Produces bevel cement splices accurately, easily, and quickly. I used the earlier version for many years, it was my first precision splicer. This machine is in near mint condition. (24969) £40.

Paillard Bolex 16 mm. Bevel Cement Splicer, sophisticated design which has never worked as well as it should in my opinion. Near mint in original box. Copy instructions. (24970) £60.

Pal Three Way Cement Film Splicer for standad 8, super 8, and 16 mm. Excellent condition in original box with copy instructions. (25408) £6.

Premier De Luxe Film Joiner with Automatic Film Scraper, for 8 mm. and 16 mm., excellent condition. (23644) £31.50.

Premier De Luxe Film Joiner for 16 mm. and 8 mm. films, with automatic film scraper, in mint condition in original box with copy of instructions. (24571) £45.

Premier De LuxeFilm Joiner 8/16 mm., with automatic scraper (no scraper blade), in original box. (25004) £5.

Premier Replacement Scraping Blade for De Luxe Film Joiner 16 mm. and 8 mm., with fitting and adjusting instructions. (24572) £5.

Pyramid Cement Splicer for Standard 8, Super 8 and 16 mm. Looks unused in box with instructions. (25576) £6.

Quik Splice Standard 8 Tape Splicer, basic model, excellent condition. (25750) £4.

Quik Splice Super 8 Tape Splicer, S-type cut, near mint condition. (25262) £4.

Quik Splice Dual 8 Tape Splicer with original instructions, near mint condition. (25454) £8.

Rank Aldis Cement Splicer for standard 8, super 8, 16 mm. Robust construction, built-in scraper, excellent condition. (23942) £8.

Splicer, Cement, 8 and 16 mm., Kestrel, near mint in original box with instructions. (25563) £5.

Wurker Super-8 Tape Splicer, uses Wurker splices, still available but not from us. Excellent condition. (23094) £22.

click here for condition categories click for how to order click for how to contact us

Top of Page

Important Catalogue Pages

Essential Order Information

Condition Categories

Postage and Packing

Photographic Pages

Advertising

Articles

Book Reviews

Catalogue

Classic Camera Magazine

F.A.Q.

Instruction Books

Links

Pieces

Shop

Spares and Repairs

We Buy

Useful Pages

What's New? - with details of recent updates to the Marriott site

Site Contents

How to Contact Us

Catalogues

Photographic Equipment

Model Railway Catalogue

Book Catalogue

Stamp Catalogue

Google

Web www.marriottworld.com

http://www.marriottworld.com/stock/cineditstock.htm ©F. and S. Marriott